1.     Remove the end cap with the provided ¼ allen wrench

2.     Pull the tube straight off of the barrel assembly

3.     Assemble in the reverse order

Note: This model has a core that is pinned and welded on to the barrel. There is only .005” of clearance between the outside of the baffle assembly and the inside diameter of the tube, therefore cleaning this model after every use is extremely important. The inside of the tube in the expansion chamber area behind the baffle stack becomes fouled very quickly which will result in the tube not being able to be pulled forward over the core. Please clean the inside of the tube after every use.  TBA Suppressors will not warranty silencers do to neglect